Guest parallel Posted April 6, 2006 Share Posted April 6, 2006 Hi All, I'm about to make a DIY background for my 4 ft tank., and wondering if anyone here have attempted such DIY. If you don't mind sharing your info's I would like to know what brand of epoxy did you used and where did you get it? Cheers Parallel Link to comment Share on other sites More sharing options...
lee427 Posted April 6, 2006 Share Posted April 6, 2006 hi parrallel,have u had a look in the sydney cichlid society diy theres one in there done with epoxy resin hope that helps you out mate Link to comment Share on other sites More sharing options...
Guest parallel Posted April 6, 2006 Share Posted April 6, 2006 hi parrallel,have u had a look in the sydney cichlid society diy theres one in there done with epoxy resin hope that helps you out mate ← Hi, Yes have have already sass that out, but he didn't specify which brand he used. So I was wondering anyone have tried using epoxy in here. Cheers Parallel Link to comment Share on other sites More sharing options...
Stuart74 Posted April 6, 2006 Share Posted April 6, 2006 Any brand will do just make sure it is suitable for Potable water usage Link to comment Share on other sites More sharing options...
codyg Posted April 6, 2006 Share Posted April 6, 2006 where can you buy epoxy resin, i have tried a few places round here with no luck? Link to comment Share on other sites More sharing options...
Stuart74 Posted April 7, 2006 Share Posted April 7, 2006 if this helps but the company I got mine from is FGI *fiber glass international* they do have a sales office in NSW and the addy is 14 Clearview Pl Brookvale NSW 2100 Ph 02 9938 7222 Fax 02 9938 5826 The brand I use is the Nuplex R180, 4lt kit should cost you somewhere around the $70 mark Link to comment Share on other sites More sharing options...
codyg Posted April 7, 2006 Share Posted April 7, 2006 thanks for that i will have to look them up! Link to comment Share on other sites More sharing options...
Guest parallel Posted April 7, 2006 Share Posted April 7, 2006 if this helps but the company I got mine from is FGI *fiber glass international* they do have a sales office in NSW and the addy is 14 Clearview Pl Brookvale NSW 2100 Ph 02 9938 7222 Fax 02 9938 5826 The brand I use is the Nuplex R180, 4lt kit should cost you somewhere around the $70 mark ← Hi, Thx for that, I'l go and sass it out. Cheers Parallel Link to comment Share on other sites More sharing options...
chrisandelana Posted April 7, 2006 Share Posted April 7, 2006 The brand of epoxy used on the background on Sydney Cichlid Society was Fiberglass (A/Asia). It is there own brand. They have an office on Willoughby Rd in Willoughby as well as another office in western Sydney somewhere. Link Click HERE Above is the original thread from this site which should answer some of your questions. Regards, Chris Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.